Spec custom printed for ceiling
Custom Printed Wallpaper Murals for Ceilings
Made in: Sweden
Style: Scandinavian
Product Type: Custom-printed, made-to-measure wallpaper mural
Material: Premium non-woven
Panel Width: 19.3 in (49 cm)
Application: Paste-the-ceiling
Pre-pasted: No
Installation: Edge-to-edge, no overlap
Panel Order: Numbered in installation order
Washability: Washable – gently wipe with a damp cloth
Lightfastness: Good – resistant to fading from sunlight
Custom Made: Yes
Returnable: No – custom-made product
Made to Measure
Each mural is custom printed to the dimensions ordered for your ceiling.
The mural is supplied in 19.3-inch (49 cm) wide panels. Because the design is printed in complete panels, available widths are offered in set increments based on the panel width.
Each panel is marked and numbered in the correct installation order.
Measuring Your Ceiling
Carefully measure the full width and length of the ceiling at several points and use the largest measurements.
We recommend adding at least 2 inches to both the total width and length to allow for walls and ceilings that may not be perfectly straight.
Do not subtract openings or other areas that will be cut out during installation. The mural should be ordered for the complete ceiling area so the design remains continuous.
L-Shaped and Irregular Ceilings
Our custom murals are printed in a rectangular shape.
For an L-shaped or irregular ceiling, measure the full width and length needed to create a rectangle covering the entire area. The sections that are not needed can then be cut away during installation.
Ordering the mural as one complete rectangle allows the design to remain continuous and the pattern to match throughout the ceiling.
If an L-shaped ceiling is ordered as two separate murals, each mural will be scaled individually according to its dimensions. The pattern will therefore not match between the two murals.
Installation Direction
Before ordering, consider the direction in which you would like the design to run across the ceiling.
The panels are numbered in installation order. Before beginning installation, lay out the panels and confirm the orientation of the mural and where the first panel should be positioned.
Material
Our murals are printed on a high-quality non-woven wallpaper material designed for paste-the-surface installation.
The material provides:
- A smooth, matte finish
- Excellent dimensional stability
- Easy paste-the-surface installation
- Good durability
- Easier removal when properly installed
The wallpaper is made using sustainably sourced wood fibers and meets applicable product and environmental standards.
Installing a Mural on a Ceiling
Ceiling installation is generally easier with two people, especially when working with longer panels.
- Before installation, verify the mural dimensions and inspect all panels for damage or visible defects.
- Lay the mural out on a clean, dry surface.
- Cut the panels along the indicated scissor markings.
- Arrange the numbered panels in the correct installation order.
- Confirm the orientation of the mural and the starting position of Panel 1 before applying adhesive.
- Apply an adhesive suitable for non-woven wallpaper directly to the prepared ceiling.
- Install Panel 1 and continue with the numbered panels in order.
- Install each panel edge-to-edge without overlapping.
- Carefully align the design between adjoining panels.
- Smooth each panel carefully against the ceiling, working out air pockets without stretching the wallpaper.
- Trim excess wallpaper along the walls and around any openings or fixtures.
- Remove excess adhesive immediately with a clean, damp sponge or soft cloth.
Prepare the ceiling according to the instructions in our Ceiling Wallpaper Installation Guide before beginning installation. How to Wallpaper a Ceiling – Scandinavian Wallpaper
Important
Because each mural is custom printed specifically to your ordered dimensions, it cannot be returned or refunded unless there is a confirmed manufacturing defect or error.
Please carefully check your measurements, design orientation, and all specifications before approving or placing your order.