Spec custom printed for walls
Custom Printed Wallpaper
Made in: Sweden
Style: Scandinavian
Product Type: Custom-printed, made-to-measure wallpaper mural
Material: Premium non-woven
Panel Width: 19.3 in (49 cm)
Application: Paste-the-wall
Pre-pasted: No
Installation: Edge-to-edge, no overlap
Panel Order: Numbered for installation from left to right
Washability: Washable – gently wipe with a damp cloth
Lightfastness: Good – resistant to fading from sunlight
Custom Made: Yes
Returnable: No – custom-made product
Made to Measure
Each of our murals is custom printed to the dimensions ordered for your wall.
The mural is supplied in 19.3-inch (49 cm) wide panels. Because the design is printed in complete panels, available widths are offered in set increments based on the panel width.
Each panel is marked and numbered in the correct hanging order for easy installation.
Measuring Your Wall
Carefully measure the full width and height of the wall at its widest and tallest points.
We recommend adding at least 2 inches to both the total width and height to allow for walls, ceilings, and floors that may not be perfectly straight.
Do not subtract windows, doors, or other openings from your measurements. These areas must remain included in the overall dimensions so the mural design is printed and positioned correctly. Openings are cut out during installation.
Wallpapering Multiple Connected Walls
If your mural will continue across two or more adjoining walls, add the widths of all continuous walls together and order the mural as one complete design.
This allows the pattern to continue correctly from one wall to the next.
Do not order adjoining walls as separate murals if you want the design to flow continuously across the walls.
Material
Our murals are printed on a high-quality non-woven wallpaper material designed for paste-the-wall installation.
The material provides:
- A smooth, matte finish
- Excellent dimensional stability
- Easy paste-the-wall installation
- Good durability
- Easier removal when properly installed
The wallpaper is made using sustainably sourced wood fibers and meets applicable product and environmental standards.
Installation
Our murals are installed using the paste-the-wall method.
- Before installation, verify the mural dimensions and inspect all panels for damage or visible defects.
- Lay the mural on a clean, dry surface.
- Cut the panels along the indicated scissor markings.
- Arrange the numbered panels in hanging order.
- Apply an adhesive suitable for the specific non-woven wallpaper material to the prepared wall.
- Begin with Panel 1 on the left and continue from left to right.
- Install each panel edge-to-edge without overlapping.
- Carefully align the design between adjoining panels.
- Remove excess adhesive immediately with a clean, damp sponge or soft cloth.
For dry, porous, newly plastered, or skim-coated walls, use an appropriate wallpaper primer before installation. The primer and adhesive must be suitable for the wallpaper material and compatible with each other.
For complete instructions, see our How to Install Standard Material Murals guide.
Important
Because each of our murals is custom printed specifically to your ordered dimensions, it cannot be returned or refunded unless there is a confirmed manufacturing defect or error.
Please carefully check your measurements and all design specifications before approving or placing your order.