How to install wallpaper on the Ceiling


Custom Printed Wallpaper – Boråstapeter Studio

Welcome to our custom wallpaper collection from Boråstapeter Studio—where Scandinavian design meets premium craftsmanship. These murals are made to order, delivering stunning visual impact tailored exactly to your space.

📐 Made to Measure

Each wallpaper is custom printed to your exact dimensions and comes in 19.3-inch wide rolls.

Murals from Boråstapeter Studio are printed in full-width strips, which is why width options in the drop-down menu appear in set increments of 19 inches. This ensures a seamless finish and makes installation smoother.

💡 Measuring Tip:

  • ✂️ Add at least 2 extra inches to both the width and height to allow for wall irregularities.

  • 🌿 Premium Non-Woven Material

    Our wallpapers are printed on high-quality non-woven material, known for:

  • ✔️ Easy installation and removal

  • ✔️ Long-lasting durability

  • ✔️ A luxurious, matte finish

They’re also:

  • ✅ CE-marked – meeting the highest standards in health, safety, and environmental protection

  • ✅ IGI certified – assurance from the International Wallcovering Manufacturers Association

  • ✅ Made from sustainably sourced wood fibers


Step-by-step guide for a smooth and professional finish

Wallpapering a ceiling might seem like a challenge, but with the right preparation and technique, it’s absolutely doable—even rewarding! Here’s how to get the best results:

🔧 Step 1: Prep the Surface

  • If your ceiling is already wallpapered with a dark or patterned wallpaper, it should be removed or completely covered with a primer or lining paper.

  • Ensure the ceiling is clean, dry, and smooth.

  • If the surface has been treated with lime or mineral paint, this must be removed before wallpapering.

  • Fill any holes or dents with spackle, then sand smooth for an even surface.

📏 Step 2: Measure and Cut

  • Use a laser level or chalk line to mark a straight guide across the ceiling. This helps ensure your wallpaper goes up straight from the start.

  • Cut the rolls at the scissor markings. Each strip is numbered—line them up in order before you begin.

🧴 Step 3: Apply the Paste

  • Use paste designed for non-woven wallpaper only.

  • Apply a thin, even layer of paste to the ceiling using a roller. Start with just one to two strip widths at a time to avoid drying out the paste.

📌 Step 4: Hang the First Strip

  • Begin on the left side and work your way to the right.

  • Align the long edge of the first strip with your guide line.

  • Use a wallpaper smoother to press the strip into place and gently remove air bubbles.

  • Trim any excess at the edges with a sharp wallpaper knife.

  • Wipe away excess paste using a soft, damp sponge.

🔁 Step 5: Continue with Remaining Strips

  • Hang the next strip directly beside the first, making sure the pattern matches up.

  • Repeat the same process: apply paste, align the pattern, smooth, trim, and clean.

  • Continue across the ceiling until all strips are in place.

💡 Pro Tip:

Get a helping hand. Installing ceiling wallpaper is much easier with two people—especially when handling longer strips.