Peel & Stick installation guide

Effortless, mess-free, and removable—just stick and smooth!

Our Peel & Stick wallpapers are crafted from high-quality non-woven material with a self-adhesive backing. Visually identical to our standard wallpapers, this version offers a clean, glue-free installation process—ideal for temporary or low-commitment decorating with lasting results.

⚠️ Important Notes Before You Begin:

  • Not suitable for heavily textured surfaces or textured paints.

  • Freshly painted walls should cure for at least 4 weeks before application (follow your paint manufacturer's instructions).

  • Wall must be clean, dry, smooth, and of uniform light color.

  • Allow wallpaper to acclimate for 24 hours in the room prior to installation.

  • Always test a small area for compatibility before starting your full install.

  • For damaged or porous walls, apply a water-based primer/sealant before installation.

  • Repeat Step 4 (pressing firmly with a smoother) after one week to reinforce adhesion.

🛠 Tools You’ll Need:

  • Plastic smoother/squeegee

  • Sharp utility or razor knife

  • Spirit level or plumb line

  • Straight edge or ruler

  • Pencil or pen for marking

🧽 Surface Preparation:

  1. Clean the wall thoroughly—free from dust, grease, and residue.

  2. If using a damp cloth, ensure the wall is fully dry before installation.

🧱 Installation Steps:

  1. Mark a Vertical Guide:
    Use a spirit level and pencil to draw a vertical line equal to one panel’s width. This will keep your first panel straight.

  2. Peel & Position:
    Peel about 10 inches of the backing paper and carefully position the panel along your guide line.

  3. Apply with Pressure:
    Press the exposed adhesive section firmly to the wall using your smoother or squeegee.

  4. Remove Air Bubbles:
    Work from the center outward to push out any air pockets using your squeegee.

  5. Seal the Edges:
    Ensure the edges are flat and fully adhered to the wall.

  6. Continue Installing:
    Peel back an additional 10 inches of the backing at a time and smooth the wallpaper onto the wall.

  7. Repeat for Remaining Panels:
    Apply each new panel edge-to-edge, aligning the pattern as needed.

❓ How Removable Is Peel & Stick Wallpaper?

Peel & Stick wallpaper is designed to be removable with minimal effort—if applied to the right surface and removed carefully.

Things to Keep in Mind:

  • Best results on smooth, painted walls (especially satin or semi-gloss finishes).

  • Matte or flat paints may absorb adhesive, making removal more difficult.

  • Textured walls may reduce adhesion, making removal easier but less secure during use.

  • While removal typically leaves no damage, we cannot guarantee that the surface will be unaffected—always remove with care.

  • Expected lifespan: 1–2 years, depending on surface and environment.